Acer Aspire Keyboard

Monday 8 october 1 08 /10 /Oct 13:34

While Acer laptops are built to be used on the go, they are not indestructible. An accidental drop or even normal wear and tear over an extended period of time can cause the laptop keys to become dislodged and fall out. Debris can also build up inside the keys and make them stick or stop working. Fixing the keys on your Acer laptop is a quick process that does not require taking the unit to a professional repair shop.

Power off the Acer laptop and flip the unit over. Slide the battery release lever over and lift the battery out of the laptop.

Turn the laptop back over and open the lid. Look inside the open area on the keyboard where the key would normally go. Check to see if the plastic retaining clip is still inside the hole.

Locate the plastic retaining clip if it fell off the Acer Aspire 5542 Keyboard along with the key. Use a pair of tweezers to set the clip back inside the hole. Line up the holes on the clip with the four raised nodules inside the keyboard hole.

Set the key back onto the plastic clip. Push the key down until it clicks into place.

Flip the laptop back over if there are keys that are not working properly. Use the Phillips-head screwdriver to remove the three screws on the left side of the case that hold the keyboard in place. Turn the laptop back over so that you can see the LCD screen.

Push the thin end of a flat-head screwdriver under the LED indicator strip above the keyboard. Pop the strip upward and pull it off the laptop.

Lift the Acer Aspire 5542 Keyboard up towards you until the long ribbon cable running from the bottom of the keyboard to the motherboard comes into view. Unplug the cable from the port on the motherboard and then pull the keyboard and its ribbon cable off the case. Spray out the underside of the keys and the inside of the Acer laptop case with canned air.

Reassemble the keyboard, LED indicator strip and battery.

By Laptop Keyboard Blog - Posted in: Acer Aspire Keyboard - Community: Acer Laptop Keyboard Blog
Enter comment - View the 0 comments
Thursday 6 september 4 06 /09 /Sep 09:45

Acer laptop keyboard, as with all keyboard, get grubby even under usual conditions. Oil from your tips of your fingers and dirt in mid-air choose and involving the secrets. Furthermore to individuals natural, inevitable ways that keyboards get dirty, most of us drink or eat while using the computer. Pollutants of food or possibly a bit of liquid sometimes falls onto, or between, laptop keyboards secrets. And, if you are your dog owner, you will probably accumulate a bit of fur within the room. Fortunately, cleaning your Acer Aspire 5516 Keyboard is not difficult--as extended since it is done frequently and muck is not allowed to build up.

Turn off laptops. Whether it's blocked right into a wall plug, unplug it.

Possess a dry, lint-free cloth and dirt in the solid surfaces across the secrets. Next, tilt laptops just slightly on its side and spray compressed air involving the secrets.

Tilt the Acer Aspire 5516 Keyboard slightly on its other area and spray compressed air again. Training until you've become as the majority of the muck pollutants out as you possibly can find.

Moisten a cloth slightly with water. Wipe it gently inside the secrets as well as the areas all over the secrets.

Dip a cotton made of woll ball in rubbing alcohol. Take advantage of the to clean involving the secrets additionally to on top of particularly soiled secrets.

Tips & Alerts

To have the ability to keep the Acer Aspire 5516 Keyboard cleaner longer, screw it up with compressed air daily. Once the cotton made of woll ball seems too wide to acquire involving the secrets, try flattening it first, or take advantage of the corner in the lint-free cloth. You can buy compressed air from various sorts of stores, including electronic stores, office supply stores and several discount retailers.

Don't wet decrease your Acer Laptop Keyboard--only use a moist, not drenched, cloth. For those who have seeping something corrosive round the keyboard, visit some professional as rapidly as you possibly can--create disassemble it and clean the inside yourself. For that safety, together with the security from the laptop, always energy it lower before cleaning.

By Laptop Keyboard Blog - Posted in: Acer Aspire Keyboard
Enter comment - View the 0 comments
Thursday 6 september 4 06 /09 /Sep 09:21

Whether you want to simply replace a damaged Acer Aspire 3810 Keyboard or disassemble your entire Acer Aspire 3810 laptop, you are going to need to remove the Acer Aspire 3810 Keyboard that is currently on the computer. The good news is that this process doesn't require a lot of time or much technical knowledge. And if you replace the keyboard on your Acer, not only will you save a lot of cash, but you may even learn a little about your computer in the process.

Power off your Acer laptop and unplug the AC power cable. Close the display and turn the unit upside down.

Unplug the battery pack from its compartment on the underside of the computer.

Turn the computer right-side up and open the display so that you have complete access to the keyboard.

Use your fingers to pry the Acer Aspire 3810 Keyboard bezel (rectangular plastic frame above the keyboard) up from its end and remove it.

Use your Phillips screwdriver to remove all three screws located just above the keyboard.

Lift the Acer Aspire 3810 Keyboard up and unplug the thick ribbon cable from the port in the back of the keyboard. Place the old keyboard aside.

Plug the ribbon cable into the back of the new keyboard and fit the keyboard over the computer. Replace the screws, bezel and battery.

By Laptop Keyboard Blog - Posted in: Acer Aspire Keyboard
Enter comment - View the 0 comments
Wednesday 20 june 3 20 /06 /Jun 05:39

Acer is a popular manufacturer of laptop computers that offers an inexpensive alternative to brands. Since laptop computers have a keyboard integrated into the laptop unit, it can become a major problem if a single key becomes loose or stuck. When a key stops striking properly, you may need to remove it from the Acer Aspire 4810T Keyboard to reset the key and troubleshoot the problem.

Open up the laptop so that the Acer Aspire 4810T Keyboard is accessible. Use your thumb to press down on the keys immediately below the key you want to remove.

Use your index finger to lift the key you wish to remove from the top, peeling it back toward the keys you are depressing with your thumb. The key should snap loose with moderate pressure.

Use tweezers to remove the key binding from the Acer Aspire 4810T Keyboard. After you take off the key, you will likely notice a few pieces of plastic still attached to the keyboard. This is the key retainer or binding. (The flat part of the key that you strike is the key cap.) Keep in mind you will need to reset the retainer on the keyboard before reattaching the key cap, so you may want to leave it in place.

Tips and warnings

Make sure not to bend the metal housing of the keyboard itself or you may not be able to put the key back on. The key retainer is somewhat flexible, but don't stress it too much or it could snap.

By Laptop Keyboard Blog - Posted in: Acer Aspire Keyboard
Enter comment - View the 0 comments
Tuesday 12 june 2 12 /06 /Jun 13:33

Whether you need to simply replace a broken keyboard or take apart your whole Acer Aspire 4810T laptop, you will have to take away the keyboard that's presently on the pc. The good thing is this process does not require considerable time or much technical understanding. And when you replace the  Acer Aspire 4810T Keyboard, you won't just save lots of cash, but you may also become familiar with a little regarding your computer along the way.

Energy off your Acer laptop and unplug the AC energy cable. Close the display and switch the system upside lower.

Unplug battery pack from the compartment around the bottom from the computer.

Turn the pc right-side up and open the display to ensure that you've complete accessibility keyboard.

Make use of your fingers to pry the Acer Aspire 4810T keyboard bezel (rectangular plastic frame over the keyboard) up from the finish and take away it.

Make use of your Phillips screwdriver to get rid of the 3 screws situated just over the keyboard.

Lift the laptop keyboard up and unplug the thick ribbon cable in the port at the back of the laptop keyboard. Put the old keyboard aside.

Plug the ribbon cable into the rear of the brand new Acer Aspire 4810T keyboard and fit the laptop keyboard within the computer. Replace the screws, bezel and battery.

By Laptop Keyboard Blog - Posted in: Acer Aspire Keyboard
Enter comment - View the 0 comments

Presentation

Share

facebook-copy-1.gif

follow.gif

Recherche

Calendrier

November 2014
M T W T F S S
          1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
             
<< < > >>
Create your blog for free on over-blog.com - Contact - Terms of Service - Earn Royalties - Report abuse - Most commented articles